John Cooper joined Mike Kousiounis (Kushy), Dave Morrison
(Tuska) and Chris Williams for the afternoon session setting up on the surface.
2 hours. John.
![]() |
| Initial setup. |
John Cooper and David Morrison (Tuska). Tuska organised delivery
of the winch and ladder which he started fettling in the morning. I turned up
about 1.30pm with some water as there was none for mixing cement. Spent a while
deciding where and how to fix the entrance ladder. Left it propped on rocks
pending a proper base being constructed Sunday. Finally spent some time cutting
off welded on nuts from the winch frame. 2 hours for me. John.
John Cooper and David Morrison (Tuska). Tuska on the surface
mixing with John below cementing boulders to prop up the entrance pipes. Not
quite so muddy today. 2 hours. John.
Mike K, Tuska, Alan Mills and Mark Helmore. Cementing and stabilising the shaft again, a dozen loads put in. The shaft is now cemented all 360° all around the edge and tied in 2-3ft. deep all around. PF’d a boulder directly down and looking at a 6ft. drop down. Mike.
John Cooper and Mike Kousiounis. Cool overcast but dry and no
wind. Mike was working at the bottom cementing boulders to prop up the entrance
pipe. John was on the surface mixing cement. Two bags of slab mix and two bags
of sand. To each bag was added half a bag of ballast and some cement. The four
mixes were split in half to lower down to Mike. Half a dozen small loads of mud
were hauled out. Very muddy underfoot on surface. 2 hours. John.